M&Amp;A Là Gì – Nơi Này Có Anh

Features

Fully scalable 3-1/2 digit process meter Accepts 4-20 mA, 10-50 mA, 0-10V, 0-200V signals Easy scaling via screwdriver 24 x 48 mm (0.94″ x 1.89″) bezel 10 mm (0.4″) high LED digits Isolated 10-30 Vdc power Detachable screw terminal connectors

*

The M-35 Microminiature Process Meter is the solution when panel space is limited or the size and weight of the indicator must be as small as possible. The bezel measures only 24 x 48 mm (0.94″ x 1.89″), yet the height of the red LED digits is a full 10 mm (0.4″).

Đang xem: M&a là gì

The M-35 is a fully scaleable 3 1/2 digit process meter for process signals. It is powered from 10-30 Vdc, so that it can run off batteries. Power and signal are isolated to 750 Vac to facilitate panel design, with no worries about ground loop errors. A detachable screw terminal connector provides a benefit rarely found on meters of this size.

Small size, low weight, and isolated DC power make the M-35 ideal for portable test equipment.

Xem thêm: Vice President Là Gì – Senior Chức Danh Trong Công Ty Bằng Tiếng Anh

*

*

The above diagram for a typical pressure monitoring / manometer application shows how simple the M-35 is to connect. The same DC source powers the transducer and meter. Only three field wires are required.

Xem thêm: Gdp Việt Nam 2020 : Một Năm Tăng Trưởng Đầy Bản Lĩnh, Vị Thế Và Cơ Đồ Kinh Tế Việt Nam

A removable screw terminal is standard. The connector pin assignments as well as the zero and span adjustments are clearly labeled on the back of the meter.

READ:  Khẩu Độ Là Gì ? Khẩu Độ Máy Ảnh Có Ảnh Hưởng Gì Đến Bức Ảnh?

Signal Display Electrical Mechanical Environmental
Signal ranges 4-20 mA, 10-50 mA, 0-10V, 0-200V
Input resistance 181Ω, 68Ω, 188 kΩ, 940 kΩ
Scaling method Zero & span potentiometers
A/D conversion Dual slope integration
Accuracy ±0.2% of range
Number of digits 3-1/2
Display range ±1999
Display type Red LED
Digit height 10 mm (0.39″)
Decimal point selection Plug-in jumpers behind front panel
Signal isolation 750 Vac
Power to meter 10-30 Vdc, 0.6 W
Bezel dimensions 24 x 48 mm (0.94″ x 1.89″), H x W
Panel cutout 22.5 x 45 mm (0.89″ x 1.77″), H x W
Depth behind panel 68 mm (2.68″) including connector
Electrical connections Four screw terminals, detachable connector
Weight 60 g (2 oz)
Operating temperature -20°C to 60°C (-4°F to 140°F)
Storage temperature -40°C to 80°C (-40°F to 176°F)

Xem thêm bài viết thuộc chuyên mục: tin tổng hợp